General
- Frequency of measurement data updates over PROFINET
- UL/CSA certification
- Gocator Rescue mode
- Original rotation angle of part when using part matching
- Size of dataQueue
- Analog output resolution
- Maximum number of frames that can be stored on a Gocator sensor
- Reverse power and safety protection
- Averaging time period for encoder frequency displayed in Gocator interface
- Encoder quadrature signals and pulses
- Surface plane tilt
- Surface plane normal vectors
- Range and intensity data selection in dual-sensor sensor setup with overlapping lasers
- Rescuing Gocator firmware
- Choosing the correct Master model or standalone connection
- Parameters that affect recording playback on firmware 3.6
- Purpose of encoder index pulse (Z)
- Accessing the Gocator GUI behind a router
- Y position or Y distance inaccurate when compared to calculating from encoder ticks
- Shock and vibration tests performed on Gocator 23xx series
- Calculating centroids
- Impact of dynamic and multiple exposure on sampling speed (G2xxx, G3xxx)
- Meaning of system calibration/alignment
- Seeing laser line when gate trigger option is enabled, but not active (G2xxx)
- Manual calibration
- Whole part not displayed in web interface (G2xxx)
- Tracking window versus active area (G2xxx)
- Encoder triggered mode not working even though encoder is connected properly
- How many configuration files can the Gocator store?
- Can't connect to sensor via a web browser, but kDiscovery detects sensor