Question
What is the bending radius for Gocator cabling?
Answer
| Sensor Model | All |
| Firmware Version | n/a |
| SDK Version | n/a |
Highflex Cordsets
Currently, all the new cables supplied by LMI Technologies are high flex cordset.
The static band radius is 34mm and dinamic band radius is 40mm.
For more information plese review CORDSETS DATASHEET.
Standard Cordsets
For standard cordset the bend radius for Gocator 2xxx, Gocator 1xxx, and Gocator 3xxx sensor cord sets is as follows:
| Cordset | Part Number | Outer Diameter (mm) | Bend Radius (mm) |
| Power and Ethernet to Master cordset, 2x RJ45 ends | 30856, 30857 | 8.89 | 140 |
| Power and Ethernet to Master cordset, 90-deg, 2x RJ45 ends | 30875, 30876 | 8.89 | 140 |
| Power and Ethernet cordset, 1x open wire end, 1x RJ45 end | 30859, 30860 | 8.89 | 140 |
| Power and Ethernet cordset, 90-deg, 1x open wire end, 1x RJ45 end | 30878, 30879 | 8.89 | 140 |
| I/O cordset, open wire end | 30862, 30863 | 8 | 124 |
| I/O cordset, 90-deg, open wire end | 30881, 30882 | 8 | 124 |
Legacy G20xx cordsets:
For Gocator 20xx sensors, the bend radius is as follows:
| Cordset | Part Number | Outer Diameter (mm) | Bend Radius (mm) |
| Ethernet cordset, RJ45 end | 30856, 30857 | 5.33 | 95.25 |
| Ethernet cordset, 90-deg, RJ45 end | 30805, 30806 | 5.33 | 95.25 |
| Power and I/O cordset, open wire end | 30737, 30738 | 8 | 123.8 |
| Power and I/O cordset, 90-deg, open wire end | 30896, 30897 | 8 | 123.8 |
| Sensor I/O to Master cordset, RJ45 end | 30739, 30740 | 5.33 | 123.8 |
| Sensor I/O to Master cordset, 90-deg, RJ45 end | 30898, 30899 | 5.33 | 123.8 |
Additional information:
For more information, download APPNOTE_Gocator_Cordsets_Supplementary_Information.zip (G23xx, G1xxx, and G3xxx sensors) or appnote_gocator-2000_cordsets-supplementary-information.zip (G20xx). The files can be downloaded from downloads.lmi3d.com.
Comments
0 comments
Please sign in to leave a comment.