| Sensor Model | All |
| Firmware Version | n/a |
| SDK Version | n/a |
Do I need the I/O cable when connecting to a Master?
When Gocator system architecture is built based on Master 810 or 2410 only the Power/LAN cable is needed. The Master provides both encoder and digital input signals to all sensors connected to a Master. You therefore don't need to wire the encoder or the digital input directly to the sensor when using a Master.
Note:
When you want to use the Digital Output or Serial Output from Gocator sensor you will need to use the I/O cable. Master 810 and 2410 distribute just input signals (encoder and digital input)
Comments
0 comments
Please sign in to leave a comment.