Sensor or Emulator not Showing Latest Settings

Sometimes the GoEmulator.exe utility or a real Gocator sensor do not show the latest or updated settings right away. This is fairly common for things like a job change right prior to entering runtime. The primary reason for this is that the web UI update is considered a lower priority function when compared to triggering image captures or processing data. 

If you wish to see the latest settings shown in the web GUI, then you need to refresh the image. 

For sensors,

1. Load the web GUI in a standard web browser by typing the sensor's IP address into the URL bar
2. Make necessary change via SDK or networked device
3. Reload the page by pressing the Reload button to the left of the URL bar
   1. 
4. Once the screen is reloaded, verify that the new settings are displayed

For the GoEmulator utility, 

1. Launch the GoEmulator
2. Make necessary change via SDK or networked device
3. Load the GoEmulator web GUI in a standard web browser by typing the emulator's IP address into the URL bar with the port extension ":3191" without the quotations
   1. Verified Emulator IP address on Manage page:
   2. Typed IP address and port into URL bar
4. Reload the page by pressing the Reload button to the left of the URL bar
   1. 
5. Once the screen is reloaded, verify that the new settings are displayed