Can't connect to sensor via a web browser, but kDiscovery detects sensor

Question

I can't connect to the sensor via a web browser, but kDiscovery detects the sensor. Why?

Answer

The network adapter settings are probably not set correctly.

To be able to connect to a sensor using web browser, the adapter and the sensor have to be on the same subnet.

Set the adapter's TCP protocol properties to Use the following IP address, and make sure the first three octets of its address are the same as those of the sensor address. For example, if the sensor address is 192.168.1.10 and the subnet mask is 255.255.255.0, the adapter's TCP properties needs to be set to use address of 192.168.1.xxx with subnet mask of 255.255.255.0.