Main Menu

All times are in GMT -8 (DST) :: The time is now 11:24 pm.

Login or Register
Create an account and register your LMI products to gain access to useful resources.

Register Account

Login

Sub Menu

Knowledge Base
Article Data
Article Ref
4888-ILXN-1449
Date Created
Fri, 20th May 2011
Date Modified
Wed, 1st Nov 2017

   Gocator cable bending radius

Question 

What is the bending radius for Gocator cabling?

Answer 

Sensor Model All
Firmware Version n/a
SDK Version n/a

The bend radius for Gocator 2xxx, Gocator 1xxx, and Gocator 3xxx sensor cordsets is as follows:

Cordset Part Number Outer Diameter (mm) Bend Radius (mm)
Power and Ethernet to Master cordset, 2x RJ45 ends 30856, 30857 8.89 140
Power and Ethernet to Master cordset, 90-deg, 2x RJ45 ends 30875, 30876 8.89 140
Power and Ethernet cordset, 1x open wire end, 1x RJ45 end 30859, 30860 8.89 140
Power and Ethernet cordset, 90-deg, 1x open wire end, 1x RJ45 end 30878, 30879 8.89 140
 I/O cordset, open wire end 30862, 30863 8 124
 I/O cordset, 90-deg, open wire end 30881, 30882 8 124

For Gocator 20xx sensors, the bend radius is as follows:

Cordset Part Number Outer Diameter (mm) Bend Radius (mm)
Ethernet cordset, RJ45 end 30856, 30857 5.33 95.25
Ethernet cordset, 90-deg, RJ45 end 30805, 30806 5.33 95.25
Power and I/O cordset, open wire end 30737, 30738 8 123.8
Power and I/O cordset, 90-deg, open wire end 30896, 30897 8 123.8
Sensor I/O to Master cordset, RJ45 end 30739, 30740 5.33 123.8
Sensor I/O to Master cordset, 90-deg, RJ45 end 30898, 30899 5.33 123.8

For more information, download APPNOTE_Gocator_Cordsets_Supplementary_Information.zip (G23xx, G1xxx, and G3xxx sensors) or appnote_gocator-2000_cordsets-supplementary-information.zip (G20xx). The files can be downloaded from downloads.lmi3d.com.